China Factory Product 25W Photographic Light Led On Camera Light Ring
Product Specifications
Model | LED411A |
Dimension | 5600K±300Kor 3200K±200K |
Weight | 1400g |
Voltage | DC7.4V-14.8V |
Power | 25W |
Color termperature | 5600K±300Kor 3200K±200K |
Brightness | 5400Lux/50cm,1600Lux/m |
Accessories | F750 lithium battery,battery charger,focus controller,soft diffuser,AC power adapter,power cord,carrying case |
Package | 4PCS/CTN or customer OEM package |
Product Characteristics
1. LED411A is composed of 411pcs of white LEDs of high illuminance and accuracy .whose color temperature reaches to 5600K or 3200k and lifetime 50000 hrs after strict screen. 2. Delicated design,compact,light-weight and convenient to carry. 3. It is heat free and remains consistent even as the battery voltage does down.It produces soft,bright light ray with standard color temperature daylight or tungsten. 4. It is PMW integrated digital designed,dimmable from10% to 100%,flicker-free. 5. It is suitable for indoor and outdoor photography and videography,portrait photography,and wedding photography,especially good for children photography. |
Operation instructions
1. Install the battery onto the light.Turn on the power switch and light works
2. There is a power indicator light on the back of the light.Turn off the light and press the power test button to the check the battery level.
3. The battery level shows as below:
4. Please adjust the brightness of LED411A by the brightness dimming knob.
5. There are four built -in magnets in the front of the light,and you can attach a diffuser with magnets to make the light rays much sofer.
6. When the battery runs out,press the installation and uninstallation button to take off the battery.It takes 4-5hrs to recharge it.
7. Please focalize the light accordingly by the focus controller on the back of the light.
8. The 40W adapter provided can be used for supplying power to the light directl.
Cautions
1. It is no need to replace the LED bulbs in normal use.Please do not disassemble the light or solder the LED bulbs by the non-professionals.
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do not use on the light directly.
5. Please do discharge and recharge the battery at least once for every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or may seriously damage the battery or cause a fire.
8. It is not allowed to throw the battery into fire.
Warranty:The LED light is guaranteed for 12 months.
The battery is guaranteed to be charged and discharged
for 500 times.
Product Pictures